Non-slip coating – tiles, timber, Vinyl, epoxy, concrete, and other floor types

Slip Doctors NSW has the experience to offer anti-slip solutions and options for all slippery floors.

Anti-slip coating for tiles, timber, vinyl, and epoxy floors:

Installation of PU Sealer with anti-slip additive:

Extremely hardwearing, two-part polyurethane-based super sealer for all resilient and resin floors, tiled and timber floors. Forms a finish with excellent elasticity. PU Sealer matte, satin, or gloss fulfills the requirements of Australian Standards.

This is a two-coat system, and in some cases, a primer coat is required. The product settles beautifully with little to no overlap marks visible on the floor. On completion, it requires 8-12 hours of curing prior to light foot traffic, and after 24 hours, 80% of durability would be achieved.

Unlike other coatings that grab the mop head and cause them to fleece, our coating product can be mopped. Reduces dirt adhesion and the time needed for day-to-day maintenance.

Anti-slip with diamond resins pads system:

Resin diamond pads/diamond pads work wonders when used by an experienced operator.

In most cases, concrete and stone surfaces have been sealed with surface sealers, or highly polished, or the wrong penetrating sealers have been applied, making them very slippery and dangerous.

Using this method, we lightly grind a thin layer off the surfaces by using the appropriate grit-sized diamond pad, and achieve the slip resistance required. We then re-seal the surfaces with an impregnating/penetrating sealer to provide stain resistance, yet keeping them non-slip.

This system works very well and outlasts any other anti-slip system for concrete and stone surfaces. The surfaces will become textured and cleaning and maintenance may be carried out as usual.